Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ACS 5.5 Logging Configuration

Our ACS 5.5 does not show any logging data in Monitoring and Report Viewer even though the following has been configured.

1. System Log Collector is Local Server, which is a Linux VM.

2. All the logging categories that we need have been submitted in Log Configuration --> Logging Categories --> Global, and configured to "Log to Local Target", see attached screenshot.

3. No Remote Log Targets have been configured.

Is there anything else I need to do to enable Monitoring and Report Viewer to see the logging data?

Background: we are using TACACS authentication for all network devices, no RADIUS has been configured. No scheduled backup for ACS data has been setup yet.

Thanks.

2 REPLIES
Community Member

ACS 5.5 Logging Configuration

Suspend and Resume the Log Data Transmission fixed the problem.

Community Member

ACS 5.5 Logging Configuration

Hi Bin

FYI

Please have a look at the following link and make sure that you have configured the Monitoring and report viewing according to the following link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/viewer_sys_ops.html#wp1052728

541
Views
0
Helpful
2
Replies
CreatePlease to create content