Hi there
we have the problem with ACS 5.3, that ip local pools are not supported anymore. Before we had a ACS 4.2 where the PPPoE configuration below worked (pool was dynamically configured in the user or group attributes of ACS 4.2). Now we would like to use a local DHCP pool (pool INTERNET) for some of the PPPoE clients, but at the same time we have some clients that should have a static IP (delivered via a Framed-IP-Address).
Now we have the problem, that the DHCP pool is not used for the dynamic PPPoE clients, can anybody help?
aaa authentication ppp ADSL local group radius
aaa authorization network ADSL local group radius if-authenticated
aaa accounting network ADSL start-stop group radius
aaa accounting system default start-stop group tacacs+
ip dhcp pool INTERNET - new
import all
network 192.168.1.0 255.255.255.0
domain-name domain.ch
!
ip vrf ADSL-INTERNET
rd 65500:101
route-target export 65500:101
route-target import 65500:101
!
interface Loopback3
ip vrf forwarding ADSL-INTERNET
ip address 10.10.10.10 255.255.255.255
!
interface Virtual-Template1
description template for incomming PPPoE sessions
mtu 1492
ip unnumbered Loopback3
no peer default ip address - old
!peer default ip address dhcp-pool INTERNET - new
keepalive 5
ppp mtu adaptive
ppp authentication chap ADSL
ppp authorization ADSL
ppp accounting ADSL
!
!ip local pool INTERNET 83.144.249.1 83.144.249.254 group ADSL - old
Thanks a lot and best regards
Dominic
