Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACS and Windows Server

I have installed ACS 5.2 on a machine and I am trying to integrate with that Windows Server 2003 ( Active Directory ) . On the ACS when i do test connection it shows me sucess but when i save the setting it gives me Time error . I kept the clock and timezone of Active Directory and ACS server as same but still it gives me error . I read on one of the blog that it is better to configure NTP on a router and then sync both the devices with same NTP .

Is it necessary to configure NTP or manual config should also work ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: ACS and Windows Server

I have ran into issues like what you are seeing without using NTP. I would suggest setting up NTP and having ACS and your servers sync to that.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
1 REPLY
Hall of Fame Super Silver

Re: ACS and Windows Server

I have ran into issues like what you are seeing without using NTP. I would suggest setting up NTP and having ACS and your servers sync to that.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
271
Views
0
Helpful
1
Replies
CreatePlease to create content