Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACS and WINS

Hi,

I have a customer that is connected to his Lan by an APN dedicated in gprs. The NAS is a GGSN Juniper and the APN ends to the customer's router that is an Cisco 3725 and the Customer Radius server is an ACS 4.0 . the customer needs to have the Wins server enabled but the Juniper cannot give it. I configure the attribute 26/09/01 cisco-avpair withe the ip of the primary server, but when the client connect to his lan the netbios result disabled. If he connected to his lan and use the radping the MS-primary is enabled.

What is the problem? Do I have to configura other parameter on the ACS? or in the Cisco router where the tunnel ipsec of the apn ends?

Thanks

Ira

1 REPLY
Bronze

Re: ACS and WINS

If you have multiple Cisco AV-Pairs to a User Profile in Access Registrar please check them as this can happen if there is some error in this.

Kindly refer this url for more details,

http://cisco.com/en/US/products/sw/netmgtsw/ps411/products_tech_note09186a0080094e9a.shtml

121
Views
0
Helpful
1
Replies
CreatePlease to create content