Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACS certificate

Hi,

I used the ACS SE 4.1 to generate a certificate to be used for PEAP authentication.when I generate the Certificate "Generate Self-Signed Certificate", it has a validity of one Year.

How can I specify the validity to 3 years or more.?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: ACS certificate

Self Signed Certificates have a default period of 1 year and can not be changed. There are various links on Cisco.com stating it one of them is as under.

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml

Regards

Manoj

Rate useful posts.

3 REPLIES
New Member

Re: ACS certificate

Self Signed Certificates have a default period of 1 year and can not be changed. There are various links on Cisco.com stating it one of them is as under.

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml

Regards

Manoj

Rate useful posts.

New Member

Re: ACS certificate

The default period is 1 year for self-signed certificates which AFAIK cannot be modified.

New Member

Re: ACS certificate

The Cisco ACS server defaults to a 1 year certificate that can not be changed.

However, you can, and what I have done is use OpenSSL to generate x509v3 certificates that have a validity of 3 years then import the certificates into the ACS.

273
Views
0
Helpful
3
Replies