Anyone using this new appliance for Active Directory integration?
This applaince runs on Linux (a good thing) but does not seem to like to talk with our AD, yet we have no problems in our environment in regards to DNS or AD. We have a case opened and hope it's a quick fix.
Just looking to see any sucess or failure stories out there on this unit in general.
Re: ACS Express Appliance 5.0 (Anyone using with AD)
This is how it works but really shouldn't work this way. There are many time in large enterprises that controllers are down for patching etc.
Attempting an AD join may fail if there are some domain controllers or global catalog servers it can not contact.
One or more domain controllers or global catalog servers that the ACS can not query or contact. AD Domain with inter-domain trusts containing trees that the ACS does not need access to descend into. The AD join process will eventually time out since it fails to return successful lookups for all domain controllers within the forest.
None via the GUI. Please contact TAC and provide the diagnostic logs.
Further Problem Description:
However the fix I was given was to edit that file I was speaking about.
Once I did this I was able to attach all 12 appliances we purchased to our AD environment.
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in HA
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationCo...
I am currently unable to specify "crypto keyring" command when configuring VPN connection on my cisco 2901 router.
The following licenses have been activated on my router :