crypto map vpnmap client authentication ACS-RADIUS LOCAL
Note: Within the crypto map, you can only enter one external authentication server group. The failover or backup authentication method can only be set to LOCAL. If there second server in the list it is only queried if the primary server is unresponsive. If the primary server is queried and issues a failed response, then the secondary server is not queried.
I would Remove the sysopt connection permit-ipsec command from the PIX Firewall configuration. Add statements to the ACL applied to the outside interface permitting Encapsulating Security Payload (ESP), UDP 500, and the traffic from the VPN pool to the specific server. You will then be able to control access to the server.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...