We have a strange issue may be an known issue. We have the ACS 184.108.40.206 with Bluecoat Packetshaper (Packeteer) as the Radius Client and tried with PAP as well as CHAP with the suggested VSA. But once we try to authenticate with GUI in the PS end we get authentication failed. i.e its says invalid password but in the ACS end we get it as the Auth success log. We are not able to login to the PS as well.
We are actually using ISE for integration. I have checked one of the documents by Cisco TAC and according to that for ACS radius authentication, they only need access=look to be sent. I have configured the same on the ISE but still same.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...