does anyone has experience in upgrading the 1113 SE from 4.0.1 to the current version (4.2)? Our customer does not have a recovery CD. I did not found such an image on CCO. In case of any problems how can the system be recovered? Exact version of current version is 4.0.1(42). I suppose the following product will be the correct one for the upgrade: CSACSE4.2-SW-MR-K9.
Re: ACS SE 1113 Upgrade from 4.0.1 to current version
The first step in migrate the ACS software running on a previous SE appliance platform (the Cisco 1111, the Cisco 1112 or the Cisco 1113) to run on the ACS 4.2 Cisco 1113 platform is to Upgrade the software on a previous SE hardware platform (the Cisco 1111 or the Cisco 1112) to ACSversion 4.1 by using the full upgrade method.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...