when i am connect to it by console port,it's bootup i see bios version and it's invite me to type F2 if i want to go setup option but after that it seems to be crashed and it dont give a possibity to insert login and password.
i test with another acs SE and it give me after bootup to insert login and password.
Also, did you try rebooting the box? If not please reboot and check the behaviour again.
If that doesn't work and If ACS SE gives you an option like Press F2 to specify the boot etc. Press F2 and get into bios using Password 'acs like acs1113'. And set the boot Preference as Hard drive. Save the settings and exit. I know that it is booting up from the harddrive but I want you to force it to boot from HD.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...