I have cisco Secure ACS 4.1 build 23 software which is installed on windows 2003 server. it is working fine. but my concern is i want to create two Network device groups and those should work with single ACS server. when i am trying to add single ACS server to both network device groups it is saying overlaaped with other network device group.
I just want to create the two network device group for my identification. can anyone help me in this.
In case of a ACS for Windows, you can change the name of the underlying windows server by
going to My computer -- Properties -- Computer name -- Change. The server name entry in the ACS is inherited from the Windows server name.(If the ACS is installed on the DC, then you cannot change the computer name on the DC)
In the ACS Appliance, you can only change the hostname by going to System Configuration --
Appliance Configuration -- Name Configuration -- Reboot the Appliance.
May i was not clear in question. i am having the ACS software installed on windows machine. I have 2 network device groups and one is not assigned group. first AAA server i added in 1 netwrok group, Now i tried to add in not assigned group as i want this server to be applicable for all groups, it showed the error duplicate name. Now i want give the correct name in not assigned group. But i am not able to delete and modify the name in first network group.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...