I'm looking for help from ACS expert about UCP (User Change Password) the landing page banner logo changes. Your advice is very appreciated. Let me explain in details.
My company has ended the contract with vendor back to few months ago. All the network devices included ACS are now handed over to our management. The ACS UCP (User Change Password) landing page has been changed by previous vendor from Cisco logo to their company Logo. Since now the device has been changed management. My manager would like this logo to change it back to my company logo. I had try to search through the whole ACS clickable function but no luck and try to search through Cisco link but do not find the related documents.
Can any ACS expert to guide me or link me to the correct document what should I do to make this changes? The sample of Cisco UCP page are attached, the logo i meant is the top left corner logo. I brush it out and replace with ABC company.TQVM.
If you have the webpage directory of the UCP you can use the tools within IE, Mozilla or Chrome to find out which image is used in the webpage. This depends on how the webpage was construced meaning if a style sheet or simple html tag for the logo your are looking to replace.
You will most likely need to restart the web server. (always keep a backup of your old config and track your changes carefully).
You can try to ask TAC to see if they can provide assistance, but this is not supported, only the test code they provide falls within support any customization is expected to be documented on the customer's end for scenarios like this, however it doesnt hurt to ask. You can also suggest someone at your company if you have a web development team (I do not mean to sound insulting in anyway, but I myself could not build a webpage to save my life and have always found luck when my customer's provide web development code that I can play with and modify if needed).
Not a problem and I understand where you are coming from. Once again please do not be upset if TAC does not provide support most of the engineers are talented and at times are in the same position as us, there a few with talents such as this so please take that into consideration.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...