cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
667
Views
0
Helpful
1
Replies

ACS Upgrade Path

Jeff Wolf
Level 1
Level 1

We have an 1113 appliance with 4.1.1.24.  Can we do an install on an 1121 and put 5.2 on it and then restore the 4.1.1.24 db..??

1 Accepted Solution

Accepted Solutions

aneelaka
Level 1
Level 1

You must deploy a separate ACS 4.x server with the current configuration for the migration in addition to your production ACS 4.x server and an ACS 5.0 appliance. In this way, you can continue running your ACS 4.x production server while you migrate data to ACS 5.0.
For information about  migration ACS 4.x to  ACS 5.0 refer to the Migration Guide below :

http://tinyurl.com/2g2tkog

Note: Please rate the answer if it helps

View solution in original post

1 Reply 1

aneelaka
Level 1
Level 1

You must deploy a separate ACS 4.x server with the current configuration for the migration in addition to your production ACS 4.x server and an ACS 5.0 appliance. In this way, you can continue running your ACS 4.x production server while you migrate data to ACS 5.0.
For information about  migration ACS 4.x to  ACS 5.0 refer to the Migration Guide below :

http://tinyurl.com/2g2tkog

Note: Please rate the answer if it helps

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: