Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

acs4.1 & aaa authorization & permit show

Selam,

I want to deny all commands except "show run" for a group and for all network devices.

So I created a group on acs4.1 and attached with a "Shell Command Authorization Set" ("permit show runnig-config" - "deny unmatched commands")

than I used commands which you can see below:

aaa authorization exec default group tacacs+ local

aaa authorization commands 1 default group tacacs+ if-authenticated

aaa authorization commands 15 default group tacacs+ if-authenticated

NOW: rules are runnig for my new group but other groups which have full access for all devices are failing (% Authorization failed)

what can be the problem?

Thanks

Ozlem

1 REPLY
Cisco Employee

Re: acs4.1 & aaa authorization & permit show

create another shell command authorization set for full access group and configure it for "unmatched commands - permit"

and do not enter any command for it.

That will work for you.

~Rohit

169
Views
0
Helpful
1
Replies