ACS5.4 Change Portconfig after successfully authenticated
i´m using ACS5.4 for Authentication.
My Portconfig ist "authentication host-mode multi-domain" because we´re using IP-Phones. All other devices will be authenticated by MAB.
Everything works fine. Now we will get special Laptops with more than one MAC-Address. I like to gain access because of the MAC-Adressee of this Laptop. If Authentication was succssfull i´need to reconfigure the Port to "authentication host-mode multihost" and after disconnection back to multi-domain.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...