Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACS5.x and IPSO6.2

Hi,

Does anyone have any experience in using Nokia IPSO with ACS5.x and non-locol accounts ( on the Nokia )

I`ve created a shell profile with the following config :

Attrib: service Value: nokia-ipso

Attrib: Nokia-IPSO-User-Role Value: "role_name_on_IPSO"

Attrib: Nokia-IPSO-SuperUser-Access Value: 1

All optional.

The user is passing authentication but is denied access on IPSO as "user not configured for Voyager".

I`m not 100% the config above is accurate as any previous instructions were based on 4.x & Interface config.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

ACS5.x and IPSO6.2

I found the same attributes can you check the service attribute and see if it is case sensitive, also try making them mandatory.

Here is an example that i found -

Service is nokia-ipso

Nokia-IPSO-User-Role=adminRole

Nokia-IPSO-SuperUser-Access=1

Tarik Admani *Please rate helpful posts*
2 REPLIES

ACS5.x and IPSO6.2

I found the same attributes can you check the service attribute and see if it is case sensitive, also try making them mandatory.

Here is an example that i found -

Service is nokia-ipso

Nokia-IPSO-User-Role=adminRole

Nokia-IPSO-SuperUser-Access=1

Tarik Admani *Please rate helpful posts*
New Member

ACS5.x and IPSO6.2

Thanks - Mandatory is required it seems !

507
Views
0
Helpful
2
Replies