I have client with ACS authenticating remote users against an LDAP. They want to have wireless users using aironet authenticate against the same directory. I can find mention of PEAP against LDAP but no configuration instructions. If I can't do it with the Aironet then they are going to use another vendors APs. Encryption from the client to the AP is not required.
Authentication for PEAP using LDAP is accomplished using Cisco's version of PEAP (EAP-GTC). Configuring the client is well documented in the Cisco Aironet Client software documentation. On the ACS side, check out the latest documentation. It requires that ACS have a server certificate and a CA certificate installed and that a CA certificate be installed on the PEAP supplicant.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...