authentication for easy vpn users using windows ad and xauth on pix firewa

[manish.gaur]

Hii

We need to authenticate the VPN client users from windows as pix as the network device where all vpn configuration done

Need the accounting for those vpn users.

Thanks

Manish GaurPlease guide me

[Patrick Laidlaw]

Manish,

Which version of the pix os are you running 6.x.x or 7.x.x. If your using 6 your have to use radius. Follow this guide for radius:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800b6099.shtml

For the actual pix configuration its easiest to run through the vpn wizard in PDM (PIX Device Manager)

The radius guide should work for 7.0 if you run the ADSM Wizard for the vpn portion.

Patrick

Please rate any posts that are helpful.

[manish.gaur]

Hii

I am runniong on pix 6.0, actually i need to use the certificate issued by the CA to the VPN client instead of Group name and password

at second level need to authenticate, authorize and accounting of the VPN users using the AD with the ACS 3.2 server.

thanks & regards