Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Authentications for Users

Hi guys,

I have cisco 3750 switch on the site and users with in the site are using WYSE terminals to access their session from DC and CITRIX servers from data center.

Router on MPLS Cloude >> CISCO 3750 Switches>> Users

is there a way or authentications /configurations on switch where only authenticated user can log on to the network.

i mean can i configure switch as a radius server (Silly question I know) and/or aaa for any user who bring the laptop/device or existing users whenever they connect to the network there should be authentivation method username or password to access the network....

regards

1 REPLY
Cisco Employee

Re: Authentications for Users

Hi,

   If the users you want to authenticate connect directly to the 3750 switches, you could try using 802.1x. With this option

they have to authenticate themselves when they connect to the 3750, if the authentication is not successful the port will not

forward any packets to the rest of the network:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_40_se/configuration/guide/sw8021x.html

Regards,

Rick.

294
Views
0
Helpful
1
Replies