Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Authorization Authorization Authorization AS5400 with Raduis

Dears,

i have my Voice GW AS5400 i need to configure Authorization with Radius server by using TCL scripts for enabling the authorization.

The AS5400 to be configured in a way to send the number in E164 format.

any suggestions please.

1 REPLY
Silver

Re: Authorization Authorization Authorization AS5400 with Raduis

To get the ip pool form the Radius server you need to configure authorization on the AS 5400. Adding the command ";aaa authorization network default group radius"; on the access server and configuring the option";Assign for the AAA server pool " ;under ip Assignment ( Group setup ) in ACS will do the job . And also add the command "radius-server authorization permit missing Service-Type" to your configuration.have a look on this link

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_white_paper09186a0080113758.shtml

263
Views
0
Helpful
1
Replies
CreatePlease to create content