Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

c805 no tacacs-server key command

Hi,

System image file is "flash:c805-y6-mw_120-4_XM"

Cisco C805 (MPC860) processor (revision 0) with 46944K bytes of virtual memory.

Processor board ID JAD051808LA

CPU part number 33

Bridging software.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial(sync/async) network interface(s)

8M bytes of physical memory (DRAM)

8K bytes of non-volatile configuration memory

8M bytes of flash on board (4M from flash card)

V_Bb(config)#tacacs-server ?

attempts

directed-request

extended

host

last-resort

optional-password

retransmit

timeout

Where is the "key" command? My server wants it.

Or my image doesn't support full TACACS+?

TIA,

2 REPLIES
Community Member

Re: c805 no tacacs-server key command

Hello,

Try configuring one line command as this "tacacs-server host hostname key XXXX" and see if it works.

However it is also indicated that Cisco 805 router in Cisco IOS Release 12.0(4)XM1 does not support AAA Radius and AAA Tacacs+ for more information please refer to the following link http://www.cisco.com/en/US/docs/ios/12_0/12_0xm/release/notes/rn800xm.html#wp15395

HTH

Ahmed

Community Member

Re: c805 no tacacs-server key command

Hi,

I think I tried it without success.

So my only solution is the upgrade?

TIA,

244
Views
0
Helpful
2
Replies
CreatePlease to create content