Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Caching credentials for webauth in ISE 1.2?

We are providing internet access through a Guest portal. The portal is provided by the ISE through webauth and the user is created through the ISE Sponsor Portal.

When an account is created and the enduser logs in to it, I would like for the ISE to cache the credentials for that user for a period of time; at least 1 or more days before it prompts them to log back in again. Right now, if a user disconnects for a short period and then goes to reconnet, it prompts for the username/password again.

Where (and how) in the ISE do you configure that?

Thank you.                  

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Caching credentials for webauth in ISE 1.2?

ISE 1.3 will have a way to allow cached credentials.  The only work-around for 1.2 is DRW (Device Registration WebAuth).

3 REPLIES
Cisco Employee

Caching credentials for webauth in ISE 1.2?

ISE 1.3 will have a way to allow cached credentials.  The only work-around for 1.2 is DRW (Device Registration WebAuth).

New Member

Caching credentials for webauth in ISE 1.2?

Thanks for the quick reply Charles. I am reading through the details of it now.

It looks like DRW basically registers the MAC of a connecting device in an identity store and then allows that device to connect. Does it still match the MAC to a guest user so that we can set time profiles against it and does it expire like the guest accounts do?

Any ETA on the release of ISE 1.3?

Cisco Employee

Caching credentials for webauth in ISE 1.2?

Sorry for the late response.  ETA for 1.3 is somewhere around July 2014.

272
Views
0
Helpful
3
Replies