Maybe you can help me here. I'm currently testing ezvpn connectivty into our MPLS network for our clients remote access LAN-to-LAN VPN. This is working fine, but I have an issue with two things.
First, can I assign an IP Address to a client based on there calling-station ID, this is basically because the clinet is assigened an IP Address based on the Group username/password and not there username.
Second, is there another way to get the RADIUS server to assign the IP Address based on the username insted of the goup username. As all clients belonging to the same VRF have the same Group username/password.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...