Can ISE 1.2 Virtual Appliance assign VPN address pool like ACS does?
I have observed that Cisco ISE Virtual Appliance (VMware) can act as a RADIUS server in the same manner as ACS does, but I cannot find the way of assigning an IP address to a remote VPN client (only assigning a VLAN).
At this point I don't know if it is strictly necessary to have the IP address assignment for the remote VPN clients done in the external firewall (i. e. Cisco ASA) in this case.
Is there any way of defining an IP address pool in the ISE itself for VPN clients authenticated against that ISE?
If the answer is not, which ones could be the options for that assignment other than the ASA pool assignment? Could it be possible defining the corresponding address pool in an internal DHCP server that could provide the IP address to the VPN client after successful authentication through ISE?
Any help would be really appreciated to clarifying these questions.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...