Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

can not upgrade ACS 5.2 to 5.3

I have a brand new ACS version 5.2.  Everything is working fine.  I go to cisco website and download the following packages:

5-2-0-26-8.tar.gpg

ACS_5.3.0.40.tar.gz

- I then uploaded these files to my Linux CentOS server

- I then go to the ACS UI and created two software respositories link:  acs-52-patch and Upgrade_to_5.3.0

From there, I ssh into the ACS and performed the following:

acs patch install 5-2-0-26-8.tar.gpg repos acs-52-patch

That works without any issues.  My ACS is now upgrade to 5.2.0-26-8

An hour later, when I tried to perform this:  acs patch install ACS_5.3.0.40.tar.gz repository Upgrade_to_5.3.0.  it is not working.  I get this message:

Failed to copy file 'ACS_5.3.0.40.tar.gz' from repository Upgrade_to_5.3.0

(Error -306)

% Error: patch install ACS_5.3.0.40.tar.gz from repository Upgrade_to_5.3.0 - transfer failed (code 1)

I've checked multiple times that the upgrade image ACS_5.3.0.40.tar.gz is good and that the md5sum matches the one posted on Cisco website:

96f4dfe1244385f968561350e6190def  ACS_5.3.0.40.tar.gz

Any ideas anyone? 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

can not upgrade ACS 5.2 to 5.3

For the upgrade you should be using the following command

application upgrade ACS_5.3.tar.gz repository-name

See http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_upg.html#wp1194859

Make sure to backup your system before starting the upgrade process

2 REPLIES
Cisco Employee

can not upgrade ACS 5.2 to 5.3

For the upgrade you should be using the following command

application upgrade ACS_5.3.tar.gz repository-name

See http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_upg.html#wp1194859

Make sure to backup your system before starting the upgrade process

Bronze

can not upgrade ACS 5.2 to 5.3

Thanks thats work.  However, after the upgrade and reboot, when I performed "show application status acs", I get this:

lab-ACS53-dev/admin# show application status acs

Application initializing...

Status is not yet available.

Please check again in a minute.

lab-ACS53-dev/admin# show application status acs

Application initializing...

Status is not yet available.

Please check again in a minute.

lab-ACS53-dev/admin#

I even waited for 30 minutes and nothing.  Finally, I gave up and performed "acs stop" and "acs start", now I am good.

Thanks.

1083
Views
0
Helpful
2
Replies
CreatePlease login to create content