Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

can't access router through ACS

Please help I configure my DS3 router with AAA and configured ACS to talk to it however I can't log into now. Tried going through the console/aux port to no avail. Need to access router without rebooting it I didn't save the config but can't reboot router at this time. Is there a work around to log into router to take AAA off?

3 REPLIES

Re: can't access router through ACS

Can you post what commands you put into the router? What does your failed connection log say on ACS?

New Member

Re: can't access router through ACS

aaa new-model

aaa authentication login default group tacacs+ local

aaa authorization config-commands

aaa authorization exec default group tacacs+ none

aaa authorization commands 0 default group tacacs+ none

aaa authorization commands 1 default group tacacs+ none

aaa authorization commands 15 default group tacacs+ none

aaa accounting send stop-record authentication failure

aaa accounting commands 0 default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

!

aaa session-id common

and i pointed it to my ACS server to no avail. So i can get to it via the SDM however it doesn't allow me to take the command out.

Re: can't access router through ACS

Can you login with the local username/password? What do you see in the ACS failed attempts log?

191
Views
0
Helpful
3
Replies
CreatePlease to create content