Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

can't configure tacacs-server port

We're unable to configure a specific port, which is required for our customer for the tacacs-server.   One of the devices is a 7604 router running this image -

c7600rsp72043-adventerprisek9-mz.122-33.SRD6.bin.  The other device is a 2960 switch with the following image - c2960-lanbasek9-mz.122-35.SE5.bin.

We don't get the option to add a port after the tacacs-server host x.x.x.x command. 

Any ideas would be greatly appreciated!

Regards..

  • AAA Identity and NAC
4 REPLIES
Cisco Employee

can't configure tacacs-server port

Hi

Please go through this link, this will be helpful regarding TCSACS Authentication and Fortigate configuration:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/acsuserguide.html

Cisco Employee

can't configure tacacs-server port

Could you please paste the output of show run | in aaa from the router.

As far as I know to have more options with in the same command, you should have "aaa new-model" enabled on the IOS. For more info, please review the command reference of the same code.

~BR
Jatin Katyal

**Do rate helpful posts**

~BR Jatin Katyal **Do rate helpful posts**
Cisco Employee

can't configure tacacs-server port

Did you get a chance to enable "aaa new-model". Just curious to know if it helps you to resolve the issue.

~BR
Jatin Katyal

**Do rate helpful posts**

~BR Jatin Katyal **Do rate helpful posts**
Silver

can't configure tacacs-server port

Hello,

I think you might have forgotten to enable aaa with the command " aaa new model". After that it will work fine.

because we normally get the option to add the port.

278
Views
0
Helpful
4
Replies