Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot login into 5.1.0.44

Here is my problem. Why can I not log into the ACS server via ssh but I can log in to the gui interface on http?
I get the username and password prompt without a problem but it will not accept my username and password.

Any thoughts?

Thanks

3 REPLIES

Re: Cannot login into 5.1.0.44

GUI interface is for ACS. CLI is for the operating system (called ADE-OS). So those are two separate things, each one with their own  users.

If you can't enter via ssh, you will have to insert your installation disc and then reload your appliance. After booting from installation disk you will be given the option to reset the admin password for console and ssh access.

If it helps, please rate or mark this question as "answered" so others could benefit from it.

Re: Cannot login into 5.1.0.44

Hi,

Since you are able to login through GUI but not through SSH access, actually the user for SSH and GUI 
access are different. So if we are not able to access the device with SSH or with console it will be 
necessary to make a password recovery.

Here is the link for the user guide:-

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_vmware.html#wp1053177

thanks,

Vinay

___________

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

Thanks & Regards

Re: Cannot login into 5.1.0.44

The username for the http interface is acsadmin, the ssh username is admin. Give this a try and see if you can get in. If you still cannot get in then you will have to follow the link that Vinay provided in the previous reply.

Thanks,

Tarik Admani

Tarik Admani *Please rate helpful posts*
337
Views
0
Helpful
3
Replies
CreatePlease login to create content