Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cannot Open the URL of CWA with ISE

Hi Folks,

I have a problem when doing the CWA with ISE so that I can Provide the access of the network for the guests.

Everything goes fine except the URL of the CWA: When the guests open the explorer and enter a domain after connecting the SSID, they will be redirected to the URL like "https://hostname.demo.com:8443/guestportal/..................." which starts with the hostname of the ISE and the domain-name of the ISE, but for us, we don't have any AD and LAN DNS for our network so that we cannot translate the hostname.demo.com into the IP of the ISE, so can I just change the URL into IP type like "https://10.10.10.70:8443/guestportal"?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Cannot Open the URL of CWA with ISE

Screenshot of a screenshot (sorry) attached.

Basically it's in authorization policy, allows you to use a static DNS or IP address

4 REPLIES
Cisco Employee

Cannot Open the URL of CWA with ISE

It's a feature in ISE 1.2.

M.

New Member

Re:Cannot Open the URL of CWA with ISE

Thanks for your help, can you tell me where to config it?


Sent from Cisco Technical Support Android App

Cisco Employee

Cannot Open the URL of CWA with ISE

Screenshot of a screenshot (sorry) attached.

Basically it's in authorization policy, allows you to use a static DNS or IP address

New Member

Cannot Open the URL of CWA with ISE

Hi Marcin,

Thanks so much!!

201
Views
4
Helpful
4
Replies