Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CAT 3560 with IOS 12.2(44) SE & AAA

I just loaded one of my 3560-24PS with the latest IOS from Cisco 12.2(44) SE with advip services.

What I notice on these switches is when I put in my AAA commands then I lose console access to my switch... it does not give me the option of entering a username of passwd. I do not have this problem on any previous IOS version for thsese switches. Anyone else has any such issues?

These are my AAA commands

aaa new-model

aaa authentication login default group tacacs+ line

aaa authentication login notac line

line con 0

login authentication notac

exit

aaa authorization exec default group tacacs+ if-authenticated

aaa authorization commands 15 default group tacacs+ if-authenticated

aaa authorization network default group tacacs+

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting system default start-stop group tacacs+

c3560-advipservicesk9-mz.122-44.SE.bin

2 REPLIES
New Member

Re: CAT 3560 with IOS 12.2(44) SE & AAA

I have to mention one more thing. If I connect to the console, I do not get any prompt or see any banner etc. However I will see all the log messages coming up on the screen.

I can ssh / telnet to the switch no problem.

New Member

Re: CAT 3560 with IOS 12.2(44) SE & AAA

Got a response from TAC. so beware abt this new IOS.

CSCsm50609

342
Views
0
Helpful
2
Replies