I'm using ACS version 4.2. I'm getting a server secret mismatch from an ASA device that is configured to auth against the ACS server. On the ACS server I want to check the Shared Secret for the NDG. Under Network Configuration I click on the appropriate network device group and according to the help on the right hand side there should be an "edit properties" button at the bottom of the page. There is no such button. What am I missing?
What browser are you using to access the ACS? Can you try another browser or another machine to make sure you are not running into a browser issue? If you are running into this issue after trying another machine/browser and you are using IE or FireFox please open a TAC service request as you may be running into a problem with the database entry for this NDG.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...