Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Changing IP's on ACS for Windows

Is there any special requirements when you have to change the IP address of the Cisco ACS for Windows server ?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Changing IP's on ACS for Windows

Florrie,

Please mark this thread resolved so other can benefit.

Regards,

~JG

8 REPLIES

Re: Changing IP's on ACS for Windows

Nope, but you'll have to change all your devices that point to it for authentication. We put ours behind load balancers so we don't ever have to change the IP's for RADIUS.

Hope that helps.

New Member

Re: Changing IP's on ACS for Windows

Many thanks for that, we are going to put the new I as the secondary TACACS statement in the config that way we can back out if we need to.

Many thanks

Jon

New Member

Re: Changing IP's on ACS for Windows

Colin

Once the IP address of the server has been changed for the NIC, will ACS pick it up or do you have to change it in the registry ? Or is it tied to the license ?

Many thanks

Florrie

Re: Changing IP's on ACS for Windows

AFAIK neither, it's tied to the IP of the server.

Re: Changing IP's on ACS for Windows

Hi Florrie,

You need to manually add that IP in acs under aaa-server.

Regards,

~JG

Re: Changing IP's on ACS for Windows

Good one Jagdeep, I forgot about that.

New Member

Re: Changing IP's on ACS for Windows

Jagdeep

Many thanks for pointing that out.

Much appreciated

Cheers

Florrie

Re: Changing IP's on ACS for Windows

Florrie,

Please mark this thread resolved so other can benefit.

Regards,

~JG

315
Views
0
Helpful
8
Replies