Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Cisco 2950 TACACS+ issue

I have several 2950 switches that I cannot get to work with TACACS.  I'm using the same config for these that I am using for other cisco switches.

Cisco Internetwork Operating System Software

IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE INTERIM SOFTWARE

System image file is "flash:c2950-c3h2s-mz.120-5.3.WC.1.bin"

username XXX privilege 15 password 7 XXXXXX

enable password XXXXXX

aaa new-model

!

aaa authentication login default group tacacs+ local

aaa authentication login conmethod enable group tacacs+

aaa authentication enable default group tacacs+ enable

aaa authorization exec default group tacacs+ if-authenticated

aaa accounting exec default start-stop group tacacs+

!

tacacs-server host XXX.XXX.XXX.XXX key 7 XXXXXXX

tacacs-server host XXX.XXX.XXX.XXX key 7 XXXXXXX 

Any help would be greatly appreciated.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Cisco 2950 TACACS+ issue

Hi,

How does your line vty configuration looks like?

Have you tried the test aaa-server command? If you have, what are you getting?

1 REPLY
New Member

Cisco 2950 TACACS+ issue

Hi,

How does your line vty configuration looks like?

Have you tried the test aaa-server command? If you have, what are you getting?

750
Views
0
Helpful
1
Replies
CreatePlease to create content