Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

The Windows version of Cisco ACS appears to have the ability to integrate with RSA Securid as its listed in the External Databases. It also can support the SDI protocol if you install the agent on the ACS Windows platform. I need to use a Cisco ACS 1113 appliance but RSA Securid does not appear under the External databases section. Does this mean I will not be able to use the SDI protocol only RADIUS available.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

And yes you are correct,

With ACS SE, We need to configure it using Radius, on ACS SE it wont work with SDI.

Regards,

Prem

10 REPLIES
New Member

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

Do you know when this will be integrated in to the ACS appliance ver 5???

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

New Member

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

Prem

This document is for the Windows ACS version

Mark

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

Mark,

This is for ACS SE, as you can see we do not have Secure ID option.

Though its for 3.3, but same works for 4.x

Regards,

Prem

Cisco Employee

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

The document is good.

Go to the following link and select the documentation yourself:

http://rsasecurity.agora.com/rsasecured/results.asp?product_program=107&page=3

you can even compare documentation for ACS for Windows and ACS appliance.

Regards

Rohit

Cisco Employee

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

Hi

For ACS appliance you have to configure RSA as radius token server.

Following link can help you configure it:

http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Cisco_ACS_333_11_AuthMan6.1.pdf

Hope this helps.

Regards

Rohit Chopra

New Member

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

Rohit

OK this looks ok.

Do you agree that the authentication traffic between the ACS and the RSA Server is RADIUS not SDI which the Windows version of ACS can support

Mark

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

And yes you are correct,

With ACS SE, We need to configure it using Radius, on ACS SE it wont work with SDI.

Regards,

Prem

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

And reason for that is, because when we configure .conf file, it needs to be imported on ACS SE, which is currently not an option, which is there on ACS for windows.

Regards,

Prem

New Member

Re: Cisco ACS 1113 Appliance v4.1 - RSA Securid v6.1 integration

Prem Rohit

Thanks for the clarification

Mark

309
Views
32
Helpful
10
Replies