02-23-2006 04:31 PM - edited 03-10-2019 02:29 PM
New to ACS, is there a way to require (or even just allow) https for accessing the administration web site?
Thanks,
Tim
Solved! Go to Solution.
02-24-2006 12:51 PM
Hi
Yes there is:
Administration Control then Access Policy. Tick the "Use HTTPS Transport for Admin Access" check box.
You need a server cert first though. Cert management pages are System Config.
Darran
02-24-2006 12:51 PM
Hi
Yes there is:
Administration Control then Access Policy. Tick the "Use HTTPS Transport for Admin Access" check box.
You need a server cert first though. Cert management pages are System Config.
Darran
02-24-2006 04:51 PM
That worked like a champ, thanks much.
02-27-2006 10:27 AM
Excellent.. how about giving some feeback via the rating system?
Thanks :)
05-19-2006 02:00 AM
Hi
I've also tried to follow the steps.this is what i did.I generated a certificate and copy paste to a notepad and put on the ftp server
at the stage were I have to install it to the server but it complains of file not supported.were do i paste the certificate and what extension suppose to be
Thanks
06-07-2006 08:26 AM
I am haveing problems accessing the device manager in my pix. It tells me that access is denied. How do I give access to the device manager through the cli.
06-09-2006 09:13 PM
You should have configured fallback passwords. Does anybody know where to get a good ACS reference guide?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide