Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ACS 4.2 (TACACS+) with Nortel switches as AAA clients

Dear All,

Can we add Nortel switches as AAA clients for ACS 4.2 using TACACS+ ?

If yes, Please suggest me how to configure.

Thanks in advance.

Regards,
Guna

 

 

  • AAA Identity and NAC
3 REPLIES
Silver

Hey,Does the Nortel switch

Hey,

Does the Nortel switch support Tacacs+?

If yes, go ahead.

Most configuration is going to be on the switch end.

Regards
Ed

**Share your knowledge. It’s a way to achieve immortality. --Dalai Lama** Please Rate if helpful. Regards Ed
New Member

Hi edwjames,Thanks for the

Hi edwjames,

Thanks for the update.

Yes Nortel switches support Tacacs+.

When i configure Nortel switch as aaa client, the connection status on the client is not coming up with aaa server.

Is there any VSA needed to configure on ACS 4.2 for supporting Nortel switches.

Thanks in advance.

Regards,
Guna

 

Silver

Guna,Tacacs+ Does not use

Guna,

Tacacs+ Does not use VSAs.

Radius uses VSAs.

 

This is what I found online:

http://198.152.212.23/css/P8/documents/100106731

See if this helps.

It has an example associated for server configuration.

In ACS 4, you need to use the shell exec and priv-lvl=<value>.

(Similar to Cisco IOS)

Regards

Ed

**Share your knowledge. It’s a way to achieve immortality. --Dalai Lama** Please Rate if helpful. Regards Ed
80
Views
0
Helpful
3
Replies