06-26-2014 03:32 AM - edited 03-10-2019 09:49 PM
hi ,
i have configured my ACS 4.2 to assigne static ip addres to vpn users (172.17.17.100) ,the acs assigne the ip address but it gives the users the default subnet mask (255.255.0.0) .
i want to change the mask to be 255.255.255.0 .
it's possible ? on the user atribute there is no option called subnet mask.
thanks
06-26-2014 09:59 AM
Could you share the ACS 4.2 configuration for this?
Rate if Useful :)
Sharing knowledge makes you Immortal.
Regards,
Ed
06-27-2014 07:54 AM
hi ,
i dont have access to the acs now but it's simple ;,when we add a user there is a field called static ip address .
06-27-2014 01:59 PM
Ok got it, let me check it out for you.
Regards
Ed
06-29-2014 05:40 PM
hi edwardcollins,
is there a new ?
06-30-2014 01:25 AM
I will check the attribute available for the ASA.
Regards
Ed
07-01-2014 06:04 AM
hi,
i found it ,
RADIUS (IETF) ###[009] Framed-IP-Netmask attribute.
we must go to interface configuration -->>RADIUS (IETF) --> ans select Framed-IP-Netmask attribute. for user .
07-02-2014 10:00 AM
Good, have you tested it?
Regards,
Ed
06-27-2014 02:32 PM
Could you tell what you are using for VPN termination, is it an ASA?
Regards
Ed
06-27-2014 03:39 PM
hi,
yes a'm using ASA
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide