Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco acs 5.4

Hello everyone!

I would like to introduce my issue. At work we connected to acs 5.non cisco devices (zyxel, zte,Alcatel.) via tacacs+ protocol.

I tried to give them readable without privileges. I mean with attribute. But I couldn't do it. If someone knows please post to me.

If its not possible with protocol tacacs+  how I can do with radius protocol?

1 ACCEPTED SOLUTION

Accepted Solutions

Cisco acs 5.4

It's not really possible to tell you how, where TACACS hadles authentication and authorization different devices handle authorization attributes diffeently, you need to refer to the documentation for your devices to find what can and can't be done.

Thanks

Chris

4 REPLIES

Cisco acs 5.4

It's not really possible to tell you how, where TACACS hadles authentication and authorization different devices handle authorization attributes diffeently, you need to refer to the documentation for your devices to find what can and can't be done.

Thanks

Chris

Community Member

Cisco acs 5.4

Thanks Chris

Cisco Employee

Re: Cisco acs 5.4

Hi Daryn,

Have you tried the below listed configuration for alcatel/tacacs.

alcatel-lucent.jpg

You may also refer the below listed link for

TACACS+ and RADIUS Attributes for Various Cisco and Non-Cisco Devices Configuration Example

http://www.cisco.com/en/US/products/ps9911/products_configuration_example09186a0080bf5512.shtml#asr

~BR
Jatin Katyal

**Do rate helpful posts**

~BR Jatin Katyal **Do rate helpful posts**
Community Member

Cisco acs 5.4

Hi Jatin

I haven't tried it  becouse the alcotel devices supports only radius protocol.

Thank you for helping!!!

268
Views
0
Helpful
4
Replies
CreatePlease to create content