Cisco ACS - Radius Auth

[zyeukash1]

Can someone give me some pointers on how to configure Cisco ACS to accept the enable password from a router using Radius rather than using the local enable password. Do I have to use the Radius attributes to achieve this? The AAA radius configuration on the router is pointing to ACS to authenticate its enable password. Can this be achieved on a group level within ACS?

[Ganesh Hariharan]

Can someone give me some pointers on how to configure Cisco ACS to
accept the enable password from a router using Radius rather than using
the local enable password. Do I have to use the Radius attributes to
achieve this? The AAA radius configuration on the router is pointing to
ACS to authenticate its enable password. Can this be achieved on a
group level within ACS?

Hi,

Check out the below links on acs configuration and aaa configuration in cisco routers

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/3.3/user/guide/sad.html

https://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/configuration/guide/overview.html

http://www9.cisco.com/en/US/tech/tk59/technologies_tech_note09186a0080093c81.shtml

Hope to Help !!

Ganesh.H

Remember to rate the helpful post