Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

cisco ACS server CSACS-1121 reinstall

How i can reinstall ACS server? It was new installation, after installation finished it could not work properly

ACS/admin# acs reset-config

  Stub Library could not be opened

*** libCARSAcsCtrlCli.so: cannot open shared object file: No such file or directory ***

ACS/admin# show application version acs

% Error finding version information for the application: acs

ACS/admin# show application

<name>          <Description>

empty screen

how i can reinstall it?

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

cisco ACS server CSACS-1121 reinstall

Hi there,

If you have the ACS 1121 appliance you will need the recovery DVD to reinstall the software this is available from the Cisco page:

Download software > Products > Security > Identity Management > Cisco Secure Access Control System > Cisco Secure Access Control System 5.3

This is the filename:

ACS_v5.3.0.40.iso

Here are the re-installation or reimage instructions:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_ins.html#wp1101132

The command "acs reset-config" only removes the configuration from the ACS GUI, but it doesn't re-install the software.

Rate if it helps!

2 REPLIES
Silver

cisco ACS server CSACS-1121 reinstall

Hi there,

If you have the ACS 1121 appliance you will need the recovery DVD to reinstall the software this is available from the Cisco page:

Download software > Products > Security > Identity Management > Cisco Secure Access Control System > Cisco Secure Access Control System 5.3

This is the filename:

ACS_v5.3.0.40.iso

Here are the re-installation or reimage instructions:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_ins.html#wp1101132

The command "acs reset-config" only removes the configuration from the ACS GUI, but it doesn't re-install the software.

Rate if it helps!

New Member

cisco ACS server CSACS-1121 reinstall

Thank you for your reply, how i can understand this is only solution.

1019
Views
0
Helpful
2
Replies
CreatePlease to create content