ACS for Windows supports the following upgrade scenarios:
•ACS 3.x to ACS 3.3.x—You can upgrade ACS 3.2.x or 3.3.x (ACS 3.2.1, 3.2.2, 3.2.3, 3.3.1, 3.3.2) to ACS 3.3.3 or 3.3.4 on Windows.
In order to upgrade your ACS windows from 3.3.3 to 3.3.4, all you need
1.] Take a configuration backup from existing ACS. ACS--->System configuration----> ACS Backup
2.] Run the setup of ACS 3.3.4. During the process it will prompt you to upgrade existing configuration. Make sure you check that option else we will loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
3.] If you want to further upgrade, please take backup again and proceed.
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...