I want to authenticate my pppoe clients using a radius server. PPPOE client sending a username and password as well as a Service Name (which is detected in Router debug as Service Tag <service name>. I want to send this Service Name (Service Tag) as a Cisco AVPair attribute to my radius server. Can anyone help me to sort out this...
I ve configured aaa authorization network defalut group radius;
The Preauthentication Enhancements for Callback feature allows users to dial in to the network access server (NAS) without being charged. This feature enables telecommuters, and other remote network users who dial in, to have the charges applied back to the NAS that they are dialing in to.
When callback is required, the NAS hangs up the current call and dials the caller back. When the NAS performs the callback, only information for the outgoing connection is applied. The rest of the attributes from the preauthentication access-accept message are discarded.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...