Hi Guys,
I am currently using TACACS+ through ACS to authenticate network admins when connecting to cisco devices. I also have a few remote devices that are administered by someone else who uses a local account to log in to cisco devices.
I want to set up accounting for these local sessions, how would i go about configuring that?
here is my current AAA model...
aaa new-model
!
!
aaa authentication login default group tacacs+ enable
aaa authentication dot1x default group radius
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa accounting exec default start-stop group tacacs+
!
Any help would be appreciated.
Randy K.