Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco IOS - Configuring accounting for local accounts.

                   Hi Guys,

I am currently using TACACS+ through ACS to authenticate network admins when connecting to cisco devices. I also have a few remote devices that are administered by someone else who uses a local account to log in to cisco devices.

I want to set up accounting for these local sessions, how would i go about configuring that?

here is my current AAA model...

aaa new-model

!

!

aaa authentication login default group tacacs+ enable

aaa authentication dot1x default group radius

aaa authorization exec default group tacacs+ if-authenticated

aaa authorization network default group radius

aaa accounting dot1x default start-stop group radius

aaa accounting exec default start-stop group tacacs+

!

Any help would be appreciated.

Randy K.

1 REPLY
Hall of Fame Super Silver

Cisco IOS - Configuring accounting for local accounts.

Randy K

Your description of the situation indicates that some users are authenticating with local accounts. But the configuration that you post shows some authentication using TACACS, some authentication using Radius, but nothing using local accounts. Could you give us some information about those users and how they are authenticated?

HTH

Rick

135
Views
0
Helpful
1
Replies