Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco ISE 1.2.1 - "12929 NAS sends RADIUS accounting update messages too frequently" error message

Hello,

Running ISE 1.2.1 Patch 1, we get following error message: "12929 NAS sends RADIUS accounting update messages too frequently" on all NAS Devices (i.e. C-4500s running SPA.03.04.00.SG.151-2.SG.bin).


There was a previous post on this forum (RE: https://supportforums.cisco.com/discussion/11894006/ise-12-wlc-5508-nas-sends-radius-accounting-update-messages-too-frequently) that stated that the "aaa accounting update newinfo" command doesn't solve this problem even though bug CSCuh01760 "Misconfigured NAS criteria needs to be changed" is resolved in ISE 1.2.1 as per the release notes.


Could you please advise us on that to do now? Thank you. 
Regards.  

6 REPLIES

Recommend you to Upgrade the

Recommend you to Upgrade the Controller

New Member

Thanks for your answer

Thanks for your answer regarding the Wi-Fi controller part. We're currently using software version 7.4.100.0 on our 5508s and are considering an upgrade to a newer version.

Fact is we're seeing the same problem on different switches (C-3560CG-8PC-S, C-2960X-48LPS-L and C-4506-E) running different IOS versions (IOS 12.2(55), IOS 15.0(2r) EX and IOS XE Version 3.4.0(SG) respectively). Do you know what can be done in that respect?

Thanks and regards.

 

 

New Member

Did you ever get a resolution

Did you ever get a resolution on this? I am running ISE 1.2.1 patch 2 and still see this. A 4506 switch does it sometimes, a 3750 switch does it all the time.

Thank you.

Cisco Employee

For the WLC side:1. You are

For the WLC side:

1. You are probably hitting this bug CSCug14713

2. You can also change the "Interim Update" located under the SSID > Security AAA Servers

 

For the Switch side:

1. You might be hitting this bug:CSCuh01760

2. Make sure that you have the following command in your config "aaa accounting update newinfo"

 

Thank you for rating helpful posts!

Thank you for rating helpful posts!
New Member

Thanks for the reply Neno.

Thanks for the reply Neno. Bug CSCuh01760 is not publicly viewable. I will experiment with the accounting update new info command. One would think this would actually send MORE accounting updates to the radius server.

http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/command/reference/fsecur_r/srfacct.html#wp1017563

Cisco Employee

I hear you. Sometimes things

I hear you. Sometimes things are not worded in the best possible way :) However, "newinfo" is definitely the way you want to go. 

 

Thank you for rating helpful posts!

Thank you for rating helpful posts!
205
Views
0
Helpful
6
Replies