Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco ISE 1.2 (802.1x wires with MS RDP)

                    we configured 802.1x , machine and user are authenicated and get thier profiles based on authorization policy from ISE.

for support purposes , we are using microsoft Remote desktop to access remote machines.

the problem is when i login on remote machine with RDP , the NAD (switch) dispaly logoff status and not detect that new remotly user login now,

which cause some issues due to applied ACL in logoff state.

4 REPLIES
Silver

Cisco ISE 1.2 (802.1x wires with MS RDP)

I've had the same experience. It seems Windows supplicant does not authenticate when the user logs on remotely via RDP. (Even if the RDP arrives on WLAN interface.)  Actually, I can understand the reasons.

New Member

HiDid you fixed your issueI

Hi

Did you fixed your issue

I have the same issue

 

Please help

Regards

New Member

I think there is no fix ,

I think there is no fix , except you disable machine authentication :(

Cisco Employee

Cisco ISE 1.2 (802.1x wires with MS RDP)

1000
Views
0
Helpful
4
Replies