We have bought Cisco NAC Applicance 3355 CAS and Cisco NAC Appliance 3355s CAM.
I have attached the network diagram for ref. We would like to deploy the NAC solution with only following features, please suggest me how to do so.
Following is the consideration, can be changes as per suggetion on deployment.
(a) Both CAM & CAS will be installed centrally at DC in hosted facility.
(b) Both CAM & CAS will be installed in Managament Zone.
(1) We would like to implement network access control intergrating with AD. So any users connecting to our LAN switch port will be authenticated against AD credential. To do so we may install NAC agent in client PC's. PC's without NAC agent should be able to authenticate using Web SSL.
(2) We would like to implement end point security for AV. PC's with NAC agent should be able to checked for latest AV dat file before they login to network and if no updated AV found than enforce AV update and than login. We do not want any isolation or qurantine VLAN for our setup.
Request please suggest me how to achieve above soltion.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...