Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco VPN3030 with ACS 3.1 cannot assign static routes to VPN clients

Hi,

My problem is that the usage of cisco-pix attribute

ip:route=dest mask gw

the static route specified in the above command is not applied to VPN clients, connectied to the VPN server. The same av-pair works fine with access-lists which are assigned to VPN clients.

Any help would be greatly appreciated.

BR,

Lora

  • AAA Identity and NAC
2 REPLIES
New Member

Re: Cisco VPN3030 with ACS 3.1 cannot assign static routes to VP

By mentioning "Not applied", do you mean that it does not show up in config?

New Member

Re: Cisco VPN3030 with ACS 3.1 cannot assign static routes to VP

Hi,

I mean that they do not appear in the routing table of the clients and they cannot access the network destinations that are accessible wia these routes.

87
Views
0
Helpful
2
Replies
This widget could not be displayed.