Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuring Cisco Access Server radius to work with Wireless Access Point

How can I configure my Cisco AS5350 aaa for RADIUS to work with a wireless access point?

  • AAA Identity and NAC
2 REPLIES
Silver

Re: Configuring Cisco Access Server radius to work with Wireless

On the Radius server, you need to configure, the "radius-server host" , define the AAA server group, configure RADIUS login authentication and some more paramenters.

Check out the following documents for a detailed configuration example:

Configuring RADIUS and TACACS+ Servers

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184a9c.html

You have to configure the "radius-server vsa send [accounting | authentication]" on the wireless access point to recognise the VSAs.

Configuring Cisco Access Server radius to work with Wireless Acc

367
Views
0
Helpful
2
Replies
This widget could not be displayed.