I am trying to configure no login authentication on console. Here are the configuration. But when I try to login thru console, it ask for password. I tried every password (secret & password) non is working. Please help.
aaa authentication login CONSOLE none
aaa authentication enable default group tacacs+ enable line
aaa authorization exec default group tacacs+ local none
Your configuration, as shown on your posting, should work as expected, ie no authentication should happen on the console. Can you post the output of "show run" (just the relevant lines, that is those starting with "aaa ... " and those following the console line.
Also, capture the debug of "debug aaa authen" and post the output.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...